Keysight Technologies N9321C, User Manual

Page: 34 / 220

Getting Started
Helpful Tips
26
IO Configuration
The N932xC spectrum analyzer provides three types of IO
connection: USB, LAN and optional GPIB interface. Press
[System]
> More > Port Setting
to set the corresponding interface as your
need.
USB
Select USB to enable the USB connection for remote control.
LAN
The N932xC supports LAN port connection for remote control.
Press
[System] > {More} > {Port Setting} > {IP Config}
to set the IP
parameters for the network connection.
Press {IP Address Static} to manually set the IP address, gateway
and subnet mask with the proper LAN information, or just press {IP
Address DCHP} to set the IP address in LAN dynamically according
DCHP. Press {Apply} to enable the LAN connection according to
the IP configuration you set.
GPIB
Press
[System] > {More} > {Port Setting} > {GPIB Address}
to set the
GPIB address for the analyzer. This softkey is only valid after the
option G01 is installed.
Timed Power On/Off
Pressing
[System] > {Power On/Off Preset} > {Timed Pwr On} or
{Timed Pwr Off}
sets the time switch to power on/off the N932xC in
a user-defined time and date. This function requires the power sup-
ply connected.
Press {Repeat Mode Once/Everyday} to set the N932xC boot up/off
in the pre-saved time everyday. The pre-saved date is invalid in this
mode.