Keysight Technologies N9321C, User Manual

Page: 174 / 220

Key Reference
Limit
166
Connected To Previous Pt
Yes No
Defines if the current point being edited is to be
connected to the previous point. Pressing this
key toggles the
Connected
value between
Yes
and
No
.
Key access:
Shift > Limit > Limit 1/2 > Edit
Delete Point
Deletes the current point in the limit line.
Pressing this key will delete the point
immediately.
Key access:
Shift > Limit > Limit 1/2 > Edit
Build From
Trace
Build a limit from current existing trace. One X/Y
point is made from each measured data point.
Once the limit have been built from the trace,
changes that you make to the trace, such as
frequency range, do NOT change the limits.
Build From Trace
action doesn't change any limit
state, if limit is on, the display will be updated.
However, limits properties will be edited just like
standard limits.
Key access:
Shift > Limit > Limit 1/2
Delete Limit Deletes the current limit set. Pressing this key
will delete the limit line entirely.
Key access:
Shift > Limit > Limit 1/2 > More
Delete
All Limits
Purges data from the limit-line tables. Pressing this key will
delete all the limit line data immediately.
Key access:
Shift > Limit