Keysight Technologies N9321C, User Manual

Page: 189 / 220

181
Instrument Messages
Device-Specific Errors
752
Unable to load state from file
Attempt to load a state from a file failed.
753
Unable to save state to file
Attempt to save a state to a file failed. See the associated error
messages for the cause.
757
Unable to load user state
A user preset failed, so the factory preset values were used. Save a
valid state into user preset and try again.
758
Unable to save user state
Attempt to save a user preset state failed.
760
Unable to query state
Query of state over the remote interface was unsuccessful.
762
Unable to load file
A failure occurred while loading a file.
764
Unable to save file
Attempt to save a file failed; the file was not saved.
767
Fatal LDS error
Attempt to initialize the instrument state has failed. Cycle
instrument power. If this fails to correct the problem, contact your
nearest Keysight Technologies service center.
768
Unable to load user state
Attempt to load a state failed, because the state was saved
with a
measurement personality that is not currently loaded. Load
the appropriate personality and try again.
770
Incorrect filename
You sent a remote command to save a screen file but did not
specify a valid extension.