Keysight Technologies InfiniiMax III Series, User Manual

Page: 32 / 128

32
2. InfiniiMax III Probe Heads
N5445A InfiniiMax III Differential Browser Probe Head
Figure 13 Proper Probe Handling
C A U T I O N Do not apply side load to the browser.
Figure 14 Improper Probe Handling
C A U T I O N Do not apply too much force when browsing. The weight of the probe in your hand
should be sufficient. The axial travel of the probe is about 15 mils (0.4 mm).
C A U T I O N The browser’s protective cap should be kept on the browser at all times except when
probing.
C A U T I O N Always remove the browser from the device under test (DUT) before disconnecting
the probe amp from the oscilloscope.