Keysight Technologies InfiniiMax III Series, User Manual

Page: 56 / 128

56
2. InfiniiMax III Probe Heads
N5441A InfiniiMax III Solder-in Probe Head
Figure 39 Adding Solder and Flux
4
Reflow the solder from the underside and insert a new piece of wire. It
is best to shape the wire into an “L” before attempting to insert.
C A U T I O N Try not to dwell with the iron in contact with the probe head.
Figure 40 Adding a New Wire
5
After attaching both the wires, they should look like the following
picture.
Figure 41 Both Wires Attached