Keysight Technologies InfiniiMax III Series, User Manual

Page: 2 / 128

Notices
© Keysight Technologies, Inc. 2000 - 2014
No part of this manual may be reproduced in
any form or by any means (including elec-
tronic storage and retrieval or translation
into a foreign language) without prior agree-
ment and written consent from Keysight
Technologies, Inc. as governed by United
States and international copyright laws.
Manual Part Number
N2800-97010
Edition
April 2014
KeysightTechnologies, Inc.
1400 Fountaingrove Parkway
Santa Rosa, CA 95403 USA
Warranty
The material contained in this document is
provided “as is,” and is subject to being
changed, without notice, in future editions.
Further, to the maximum extent permitted by
applicable law, Keysight disclaims all war-
ranties, either express or implied, with
regard to this manual and any information
contained herein, including but not limited
to the implied warranties of merchantability
and fitness for a particular purpose. Keysight
shall not be liable for errors or for incidental
or consequential damages in connection
with the furnishing, use, or performance of
this document or of any information con-
tained herein. Should Keysight and the user
have a separate written agreement with war-
ranty terms covering the material in this
document that conflict with these terms, the
warranty terms in the separate agreement
shall control.
Technology Licenses
The hardware and/or software described in
this document are furnished under a license
and may be used or copied only in accor-
dance with the terms of such license.
Restricted Rights Legend
If software is for use in the performance of a
U.S. Government prime contract or subcon-
tract, Software is delivered and licensed as
“Commercial computer software” as defined
in DFAR 252.227-7014 (June 1995), or as a
“commercial item” as defined in FAR
2.101(a) or as “Restricted computer soft-
ware” as defined in FAR 52.227-19 (June
1987) or any equivalent agency regulation or
contract clause. Use, duplication or disclo-
sure of Software is subject to Keysight Tech-
nologies’ standard commercial license
terms, and non-DOD Departments and
Agencies of the U.S. Government will receive
no greater than Restricted Rights as defined
in FAR 52.227-19(c)(1-2) (June 1987). U.S.
Government users will receive no greater
than Limited Rights as defined in FAR
52.227-14 (June 1987) or DFAR
252.227-7015 (b)(2) (November 1995), as
applicable in any technical data.
Safety Notices
C A U T I O N .
CAUTION denotes a
hazard. It calls attention to a proce-
dure that, if not correctly performed
or adhered to, could result in dam-
age to or destruction of the product.
Do not proceed beyond a caution
note until the indicated conditions
are fully understood and met.
W A R N I N G .
WARNING denotes a
hazard. It calls attention to a proce-
dure which, if not correctly per-
formed or adhered to, could result
in personal injury or loss of life. Do
not proceed beyond a warning note
until the indicated conditions are
fully understood and met.