66 Getting Started Guide
Front and Rear Panel Functions
Front Panel Features
11
Indicator Lights for RF
Transceiver B
ports
These lights indicate the status of the connectors, not whether they are
connected to a device or not.
c
Each antenna has 3 indicator lights: one for the transmitter and two for the
transmitter/receiver.
12-15
RF ports for Transceiver A
(RFM1)
These ports transmit and receive using the Transceiver A base station emulator
of the UXM.
12
Tx2
This provides the secondary RF output port for Transceiver A. The maximum
safe input level is 0.5W (+27 dBm), -15 to 0 VDC.
13
TxRx2/Rx2
This secondary Transceiver A port acts in duplex mode, when it transmits and
receives RF signals or in simplex mode when it only receives RF input. The
maximum safe input level is 1W (+30 dBm), ±10 VDC.
14
TxRx1/Rx1
This primary Transceiver A port acts in duplex mode, when it transmits and
receives RF signals or in simplex mode when it only receives RF input. The
maximum safe input level is 1W (+30 dBm), ±10 VDC.
15
Tx1
This provides the primary RF output port for Transceiver A. The maximum safe
input level is 0.5W (+27 dBm), -15 to 0 VDC.
16
Indicator Lights for RF
Transceiver A ports
These lights indicate the status of the connectors, not whether they are
connected to a device or not.
Each antenna has 3 indicator lights: one for the transmitter and two for the
transmitter/receiver.
17
Touch-screen
LCD Flat-Panel Display with single touch 15” capacitive touch-screen.
a. See
“Power Status Indicator” on page 67
b. See
“Second Transceiver” on page 67
.
c. See
“RF Transceiver Status Indicator” on page 68
.
Number
Item Name
Description
