Getting Started Guide 25
Quick Start
Turning On the Test Set the First Time
Turning On the Test Set the First Time
DO NOT remove the AC power during boot-up/shutdown of the operating
system or during the process of initializing the software. This can cause
damage to the system files and prevent proper operation of the instrument.
Before switching on this instrument, make sure the supply voltage is in the
specified range.
Step
Action
Notes
1.
Connect power
cable
Install the instrument so that
the detachable power cord is
easily reached by the
operator.
Ensure power outlet is provided with a protective ground as
specified.
2.
Power on the test
set
Position the test set so you
have easy access to the
power cord and plug it in.
Select the On position for the
rear-panel AC line power
switch.
Press the power button
(bottom right of instrument
front panel) when the LED
above the power button
illuminates in yellow. (It is
best to wait at least 3
seconds after the LED is
yellow before pressing the
power button.)
See
“Instrument Location and Rack Mounting
Front-panel power button:
