Keysight Technologies AC6801B, Operating And Service Manual

Page: 43 / 197

After changing LAN settings, you must save the changes by pressing
System > IO > LAN > Apply. Saving changes restarts the LAN connection with the
new settings. LAN settings are nonvolatile; they will not be changed by power
cycling or *RST. To cancel your changes, select System > IO > LAN > Cancel.
By default, DHCP is on, which may enable communication over LAN. The acronym DHCP stands for
Dynamic Host Configuration Protocol, a protocol for assigning dynamic IP addresses to networked
devices. With dynamic addressing, a device can have a different IP address every time it connects to
the network.
Viewing Active Settings
To view the current LAN settings:
Front Panel SCPI Command
[Menu > System > IO > LAN > Settings
Scroll with the up and down arrows.
Not available
As you scroll through the list of settings, you will see the following:
These may be different from settings requested in the front panel menu due to the configuration of the
network, and you cannot edit the settings from this screen.
Keysight AC6800B Series Operating and Service Guide 43
1 Getting Started