4 / 61
Introduction
2019/11
010-917_SON_EN
1
Introduction
Dear Customer,
We are pleased that you have decided to buy one of our products. We are certain that it will fully meet your
requirements.
These installation, operating and maintenance instructions contain important information that has to be observed
during installation, assembly, operation, maintenance and repair. Prior to carrying out any work on the system, the
operator and the responsible specialist staff must carefully read and heed these instructions. We wish you smooth
and successful installation.
In trying to keep our quality standard as high as possible, we rely on your help of course. Please let us know of
any possible improvements we could make to our product.
Do you have any questions? We look forward to hearing from you.
1.1
Product description, general
The grease separator separates greases, oils and sludge out of the wastewater. The grease separator system
has been designed in accordance with EN 1825. The waste can be extracted off at any time and without
interrupting operation. Depending on the model type, the grease separator system is equipped with an electric
system control and pump as well as various control valves. A viewing window makes it possible to check the
amount of grease collected in the system tank.
1.2
Use
Animal and vegetable oils and fats must not be discharged into public disposal systems and into bodies of water,
since they can cause narrowing of cross-sections and blockages in the disposal pipes when they set. In addition,
fatty acids are produced after a short decomposing time, leading to unpleasant odours and corroding pipes and
constructional elements of the draining systems. The solidified grease layer on the surface of the water also
hinders the necessary oxygen supply to bodies of water and sewage treatment plants.
DIN 1986 Part 1 requires harmful substances to be trapped. For these reasons, grease separator systems
according to DIN 4040 or prEN 1825 must be planned, and disposal must take place accordingly.
