KEPCO BOP 5-20DL, Operator'S Manual

Page: 14 / 70

1-6
BOP 5-20DL 081915
1.3.2 DYNAMIC SPECIFICATIONS
Dynamic specifications are listed in Table 1-5 for a nominal resistive load, and in Table 1-5 for a
2mH inductive load (current mode). The typical dynamic responses of the BOP output are tabu-
lated in both the time domain (Output response to a step program) and in the frequency domain
(bandwidth) for large and small signals.
1.4 MISCELLANEOUS FEATURES
1.4.1 OUTPUT RANGE
The BOP can be locally (front panel) adjusted, or remotely programmed, from (–)100% to
(+)100% of its specified d-c voltage and current range. The Class A bipolar output stage permits
operation as either a
source or a sink . (See Figure 1-2).
FIGURE 1-2. BOP OUTPUT CHARACTERISTIC
TABLE 1-4. DYNAMIC SPECIFICATIONS FOR NOMINAL RESISTIVE LOAD
MODEL
3dB
BANDWIDTH
(KHz)
RISE AND FALL
TIME 10-90%
(

S)
LARGE SIGNAL FRE-
QUENCY RESPONSE
(KHz)
SLEW
RATE
REOVERY AT
STEP LOAD
(

S)
Voltage Current Voltage Current Voltage Current Voltage Current Voltage Current
BOP 5-20DL 3.5 10 125 50 3.5 10 0.08V/

S 0.9A/

S 250 75
TABLE 1-5. DYNAMIC SPECIFICATIONS, IN CURRENT MODE FOR 2mH INDUCTIVE LOAD
MODEL
3dB BANDWIDTH
(Hz)
RISE & FALL TIME
10%-90%

msec)
BOP 5-20DL 140 2.5