KEPCO BOP 5-20DL, Operator'S Manual

Page: 26 / 70

2-2
BOP 5-20DL 081915
7 CURRENT meter I
O
d-c digital output ammeter
8 CURRENT control Provides manual adjustment of BOP d-c output current when CURRENT
CONTROL switch set to ON.
9 CURRENT CONTROL
switch
Provides manual adjustment of BOP d-c output current when CURRENT
CONTROL switch set to ON.
10 Io Mode indicator LED lamp, indicating current mode operation.
11 CURRENT PROGRAMMING
INPUT terminals
Programming input terminals for current control channel.
12 CURRENT LIMITS (+)
control
Control for manual adjustment of the positive (+) current limit.
13 CURRENT LIMIT indicator LED lamp, indicating current limiting operation.
14 CURRENT LIMITS (–)
control
Control for manual adjustment of the negative (–) current limit.
15 SENSE (Output) terminal Used for OUTPUT sense connection.
16 OUTPUT terminal Used to connect power supply to load (parallel with rear panel barrier strip
terminals).
17 GROUND terminal Ground terminal (parallel with rear panel barrier strip terminals)
18 COMMON terminal Provides common return for power supply output (parallel with rear panel barrier
strip terminals)
19 SENSE (Common) Used for COMMON sense connection (parallel with rear panel barrier strip
terminals).
20 VOLTAGE LIMITS (+)
control
Control for manual adjustment of the positive (+) voltage limit.
21 VOLTAGE LIMIT indicator LED lamp, indicating voltage limiting operation.
22 VOLTAGE LIMITS (–)
control
Control for manual adjustment of the negative (–) voltage limit.
23 Eo Mode indicator LED lamp, indicating voltage mode operation.
24 VOLTAGE PROGRAMMING
INPUT terminals
Programming input terminals for voltage control channel.
TABLE 2-2. BOP REAR PANEL TERMINATIONS AND CONTROLS
FIG. 2-1
INDEX NO.
NAME OF TERMINATION
OR CONTROL
FUNCTION
1 PC-12 Rear Programming Connector.
2 J211 OUTPUT ON-OFF Port. See PAR. 1.4.3 and Table 1-7 for details
3 REAR TERMINALS
(TB201)
Rear barrier strip with output, sensing and ground terminals.
4 P201 A-C power input jack. accepts 3-wire line cord (supplied).
TABLE 2-1. BOP FRONT PANEL TERMINATIONS AND CONTROLS (CONTINUED)
FIG.
INDEX NO.
NAME OF TERMINATION
OR CONTROL
FUNCTION