KEPCO BOP 5-20DL, Operator'S Manual

Page: 21 / 70

BOP 5-20DL 081915
1-13/ ((1-14 Blank)
1.7 ACCESSORIES
Accessories (not supplied) are listed in Table 1-10.
1.8 SAFETY
Service must be referred to authorized personnel. Using the power supply in a manner not
specified by Kepco. Inc. may impair the protection provided by the power supply. Observe all
safety precautions noted throughout this manual. Table 1-11 lists symbols used on the power
supply or in this manual where applicable.
TABLE 1-10. ACCESSORIES - NOT SUPPLIED
ITEM
FUNCTION
KEPCO
PART NUMBER
Rear Programming
Connector, Unwired 50-terminal printed circuit connector, unwired, for access to all rear
programming connections and flag-signal outputs. PC-12
Slides Ease of access to adjustments through top cover 110 QD
(Jonathan)
4886 Interface Card Allows remote programming of BOP via GPIB or RS 232 interface using
IEEE 488 and SCPI commands and queries. NOTE: Contact Kepco to
disable ON-OFF Port before using this card. BIT 4886
802E Interface Card Allows remote programming of BOP via Ethernet /LAN using web pages.
NOTE: Contact Kepco to disable ON-OFF Port before using this card. BIT 802E
TABLE 1-11. SAFETY SYMBOLS
SYMBOL Meaning
WARNING: RISK OF ELECTRIC SHOCK.
CAUTION: REFER TO REFERENCED PROCEDURE.
WARNING
INDICATES THE POSSIBILITY OF BODILY INJURY
OR DEATH.
CAUTION
INDICATES THE POSSIBILITY OF EQUIPMENT
DAMAGE.
!