KEPCO BOP 1000W, Operator'S Manual

Page: 22 / 188

1-2
BOP HIPWR 080709
TABLE 1-2. BOP GENERAL SPECIFICATIONS
SPECIFICATION RATING/DESCRIPTION RATING/DESCRIPTION
INPUT CHARACTERISTICS
a-c voltage nominal 230 Va-c
Single phase
range 176 - 264 Va-c
Frequency nominal 50-60 Hz
range 47 - 63 Hz
Current 176 Va-c 9.5A maximum
264 Va-c 6.4A maximum
Power factor
Source 0.99 minimum
nominal output power
Sink 0.97 minimum
Efficiency 65% minimum when sourcing
Switching frequency 70 KHz PFC Stage
EMC Compliance EN61326-1 (1997) Class A equipment
EMC immunity to: ESD EN61000-4-2 Electrostatic discharge
Radiated RF EN61000-4-3
EFT EN61000-4-4 Electrical fast transient/burst
Surges EN61000-4-5
Conducted RF EN61000-4-6
EMC emissions Conducted EN61000-3-2 harmonics
EN61000-3-3 fluctuation & flicker
Conducted EN55011/CISPR11 0.15 to 30 MHz
Radiated EN55011/CISPR11 30 to 1000 MHz
Leakage current 3.5 mA 230V a-c, 47-63 Hz
Insulation coordination Input Installation Category II
Overvoltage Category II
Output Installation Category II
Overvoltage Category II
Pollution degree 2
OUTPUT CHARACTERISTICS
1
Type of stabilizer Voltage-current, 4-quadrant Switch mode
Switching frequency 100KHz Output Stage
Source adjustment
range voltage -100% to +100% of rating 0 to 50 deg C
current -100% to +100% of rating
Sink adjustment range voltage -100% to +100% of rating Recuperated energy is sent
back into line for reuse
current -100% to +100% of rating
Programming
resolution / accuracy Voltage 14 bits / 0.03% 2% accuracy for Ext Ref Level (see PAR.
3.4.3.2). Unit gain adjustable between 0 and
EO
NOM
(voltage) or EO
NOM
(current).
Current
14 bits / 0.1%
Voltage Limit 12 bits / 0.3%
Current Limit 12 bits / 0.5%
Readback
resolution / accuracy Voltage 16 bits / 0.05% main or limit channel
Current 16 bits / 0.1% main or limit channel
NOTE 1 - Output characteristics are for a single standalone unit. Output characteristics of identical multiple unit parallel/series config-
urations are described in the Technical Manual associated with the applicable Cable Kit (see Table 1-5).