Kendro Heraeus Biofuge haemo, Instructions For Use Manual

Page: 36 / 64

Operation
32
Changing the settings during the run
You can increase the speed setting for the current run
by pressing "set" in the "speed" panel, adjusting the
value with the "+" key and again pressing "set". If you
use the same procedure to lower the speed (by press-
ing "-" instead of "+"), the centrifuge brakes to standstill
and then accelerates again to the newly selected
speed.
Likewise you can alter the preset run time during a run
by pressing consecutively "set" in the "time" panel, "+"
or "-" and again "set".
Displaying the preset values
You can check the preset values for speed and run
time by pressing one of the "set" keys. If you press the
key again, the display turns dark.
Stopping the centrifuge
Stopping with preset time
Normally the run time has been preselected, and all
you have to do is wait until the centrifuge terminates
the run automatically. During braking, the "speed"
panel reads "br" and the "time" panel "0":
Biofug e haemo
set
set
1 2 0 0 0
1 0
speed time
Biofug e
haemo
set
set
0 0
speed time
lid
quick
run
start
stop
+
-
INSTRUMENTS