![background image](http://html2.mh-extra.com/html/keithley/sourcemeter-2601/sourcemeter-2601_reference-manual_4018913046.webp)
This page left blank intentionally.
1-22
Return to
2600S-901-01 Rev. C / January 2008
Section 1: Getting Started
Series 2600 System SourceMeter® Instruments Reference Manual
• Select
FACTORY
to restore factory defaults, and press
ENTER
.
To select power-on setup:
1. Press the
MENU
>
SETUP
>
POWERON
, and then press
ENTER
2. Do one of the following:
• Choose
FACTORY
to load the original defaults
• Select
USER NUMBER
(1 through 5) to load a user preference.
3. Press
ENTER
.
4. Press
EXIT
to return to the main menu.
Remote operation setups
To save and recall user setups:
The
setup.save
and
setup.recall
commands are used to save and recall user setups:
setup.save(n)
setup.recall(n)
where:
n = 1, 2, 3, 4 or 5
Save present setup in memory.
Recall saved user setup from memory.
To restore default setups:
The reset commands return the Series 2600 to the original factory defaults:
reset()
Restore all factory defaults.
smua.reset()
Restore Channel A defaults.
smub.reset()
Restore 2602/2612/2636 Channel B defaults.
To select power-on setup:
The
setup.poweron
command is used to select which setup to return to on power-up:
setup.poweron = n
where:
n = 0 (*RST defaults)
n = 1 to 5 (user setups 1-5)
Select power-on setup.