![background image](http://html2.mh-extra.com/html/keithley/sourcemeter-2601/sourcemeter-2601_reference-manual_4018913291.webp)
2600S-901-01 Rev. C / January 2008
Return to
12-31
Series 2600 System SourceMeter® Instruments Reference Manual
Section 12: Instrument Control Library
Example
Prompts the operator to enter a voltage value – Valid input range is 0 to +2.00, with
a default of 0.50:
value = display.prompt("0.00", "V", "Input 0 to +2V" 0.5, 0, 2)
The above command will display the following input prompt:
0.50V
Input 0 to +2V
display.screen
Attribute
The selected display screen.
Usage
displayid = display.screen
-- Reads display screen.
display.screen = displayid
-- Writes display screen.
Set
displayid
to one of the following values:
0
or
display.SMUA
Displays source-measure and compliance for
SMU A.
1
or
display.SMUB
Displays source-measure and compliance for
SMU B.
2
or
display.SMUA_SMUB
Displays source-measure for SMU A and SMU B.
3
or
display.USER
Displays the user screen.
Remarks
Setting this attribute selects the display screen for the front panel. This attribute can be read
to determine which of the four available display screens was last selected
by the user. The user can select the screen by value or one of the enumerations.
Details
See “
.
Example
Selects the source-measure and compliance limit display for SMUA:
display.screen = display.SMUA
display.sendkey
Function
Sends a keycode to simulate the action of a front panel control.
Usage
display.sendkey(keycode)
Set
keycode
to one of the values shown below:
display.KEY_AUTO
or
73display.KEY_OUTPUTA
or
88
display.KEY_CONFIG
or
80display.KEY_OUTPUTB
or
96
display.KEY_DIGITSA
or
87display.KEY_RANGEDOWN
or
81
display.KEY_DIGITSB
or
84display.KEY_RANGEUP
or
65
display.KEY_DISPLAY
or
72display.KEY_RECALL
or
85
display.KEY_ENTER
or
82display.KEY_RELA
or
70
display.KEY_EXIT
or
75display.KEY_RELB
or
67
display.KEY_FILTERA
or
77display.KEY_RIGHT
or
103
display.KEY_FILTERB
or
74display.KEY_RUN
or
71
display.KEY_LEFT
or
104display.KEY_SPEEDA
or
94
display.KEY_LIMITA
or
93display.KEY_SPEEDB
or
91
display.KEY_LIMITB
or
90display.KEY_SRCA
or
79
display.KEY_LOAD
or
95display.KEY_SRCB
or
76
display.KEY_MEASA
or
86display.KEY_STORE
or
78
display.KEY_MEASB
or
83display.KEY_TRIG
or
92
display.KEY_MENU
or
68display.WHEEL_ENTER
or
97
display.KEY_MODEA
or
69display.WHEEL_LEFT
or
107
display.KEY_MODEB
or
66display.WHEEL_RIGHT
or
114
Remarks
Sending this command simulates the pressing of a front panel key or wheel, or turning the
Wheel one click to the left or right.
Details
See “
Example
“Press” the
RUN
key:
display.sendkey(display.KEY_RUN)