Series 2600B System SourceMeter® Instrument Reference Manual
Section 7: TSP command reference
2600BS-901-01 Rev. C / August 2016
7-397
Details
Use
tsplink.writebit()
and
tsplink.writeport()
to control the output state of the trigger
line when trigger operation is set to
tsplink.TRIG_BYPASS
.
If the output line is write-protected by the
tsplink.writeprotect
attribute, this command is
ignored.
The reset function does not affect the present states of the TSP-Link trigger lines.
Example
tsplink.writebit(3, 0)
Sets trigger line 3 low (0).
Also see
(on page 7-398)
tsplink.writeport()
This function writes to all TSP-Link synchronization lines. This function is not available on the Models
2604B/2614B/2634B.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Function
Yes
Usage
tsplink.writeport(
data
)
data
Value to write to the port (0 to 7)
