Section 2: General operation
Models 707B and 708B Switching Matrix Reference Manual
2-70
707B-901-01 Rev. A / August 2010
Identify the instrument
If you have a bank of instruments, you can click
ID
to determine which one you are communicating
with.
Make sure you have a remote connection to the instrument.
In the upper right corner of the Home
page, click
.
The button turns green, and the LAN status indicator on the instrument blinks.
Figure 44: ID lit
Click
ID
again to return the button to its original color and return the LAN status indicator to steady.
Log in to the instrument
The web interface has both interactive and read-only pages. These pages are always listed in the
navigation panel on the left side of the web interface.You can review information on any of the pages
without logging in, but to change information, you must log in.
Pages that contain information you can change include a
Login
button. Once you have logged in to
one page of the web interface, you do not need to log in again unless you reload the page.
To log into the instrument:
1. Open a page that contains a
Login
button, such as one of the Cards pages, Scan Builder, or TSB
Embedded.
2. Click
Login
. The login dialog box is displayed.
Figure 45: Log in