Section 11: TSP command reference
Series 3700A System Switch/Multimeter Reference Manual
11-38
3700AS-901-01 Rev. D/June 2018
channel.calibration.adjustcount()
This function gets the number of times that a card has been adjusted.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Function
Yes
Usage
count
= channel.calibration.adjustcount("slot
X
")
count
Return value representing the number of times the instrument has been adjusted
X
The slot number (
1
to
6)
Details
This command can be used with channels that are locked or unlocked. If no
channelList
is
provided, the currently unlocked channels are assumed.
There is only one adjustment count per card. Therefore, with no channel unlocked, the only
acceptable values for
channelList
are
"slot1"
,
"slot2"
, and so on. An error is generated if
any other values are used.
Example
Count = channel.calibration.adjustcount("slot1")
print(Count)
Assign the number of times the card in slot 1 has been adjusted to a user variable named
Count
.
Output the value.
3
This shows that the instrument has been adjusted 3 times.
Also see
channel.calibration.adjustdate()
(on page 11-38)
channel.calibration.adjustdate()
This function sets or gets the adjustment date in UTC format (number of seconds since January 1, 1970) on the
unlocked channel.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Function
Yes
Usage
returnDate
= channel.calibration.adjustdate("slot
X
")
returnDate
= channel.calibration.adjustdate("slot
X
",
date
)
returnDate
The adjustment date in UTC format
X
The slot number (
1
to
6
)
date
The date of the adjustment (UTC formatted)
