manualshive.com logo in svg

Keithley 2657A, Reference Manual, Page: 279 / 805

Share
Download
Keithley 2657A Reference Manual Download Page 279

Section 6: Instrument programming 

Model 2657A High Power System SourceMeter® Instrument Reference Manual

 

6-30 

2657A-901-01 Rev. B/December 2012 

 

Installing the TSB add-in 

When you install the Test Script Builder Software Suite, all available updates for TSB Add-in software 
are also installed. This includes any additional tools for the Test Script Builder Integrated 
Development Environment (TSB), and also Model 2657A-specific examples and help files (see 

Installing the TSB software

 (on page 6-29)). In addition to the software suite, a separate add-in is 

provided on the product specific CD. You can use this add-in to update previous TSB software 
installations. 

Before installing the TSB Add-in software, you must install the TSB software. 

To install the TSB Add-in software: 

1.  Close all programs. 
2.  Place the Series 2650A Product Information CD (Keithley Instruments part number 2650AS-950-

01) into your CD-ROM drive. 

3.  Double-click the Add-in to start installation. 
4.  Follow the on-screen instructions. 

If your web browser does not start automatically and display a screen with software installation links, 
open the installation file (

setup.exe

) located on the CD-ROM to start installation. 

 

Using Test Script Builder (TSB) 

Keithley Instruments Test Script Builder (TSB) is a software tool that simplifies building test scripts. 
You can use TSB to perform the following operations:  

•

 

Send remote commands and Lua statements  

•

 

Receive responses (data) from commands and scripts 

•

 

Upgrade instrument firmware 

•

 

Create, manage, and run user scripts 

•

 

Debug scripts 

•

 

Import factory scripts to view or edit and convert to user scripts 

The Keithley Instruments Test Script Processor (TSP

®

) scripting engine is a Lua interpreter. In TSP-

enabled instruments, the Lua programming language has been extended with Keithley-specific 
instrument control commands. For more information about using the Lua scripting language with 
Keithley TSP-enabled instruments, refer to the 

Fundamentals of programming for TSP

 (on page 6-10) 

section. 

Keithley has created a collection of remote commands specifically for use with Keithley TSP-enabled 
instruments; for detailed information about those commands, refer to the "Command reference" 
section of the documentation for your specific instrument. You can build scripts from a combination of 
these commands and Lua programming statements. Scripts that you create are referred to as "user 
scripts." Also, some TSP-enabled instruments come with a number of built-in factory scripts. 

 

Summary of Contents for 2657A






































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments