Section 5: Introduction to TSP operation
Model 2657A High Power System SourceMeter® Instrument Reference Manual
5-8
2657A-901-01 Rev. B/December 2012
LAN and LXI
The LAN commands have options that allow you to review and configure network settings.
The
lan.config.*
commands allow you to configure LAN settings over the remote interface. Note
that you must send
lan.applysettings()
for the configuration settings to take effect.
The
lan.status.*
commands help you determine the status of the LAN.
The
lan.trigger[
N
].*
commands allow you to set up and assert trigger events that are sent over
the LAN.
Other LAN commands allow you to reset the LAN, restore defaults, check LXI domain information,
and enable or disable the Nagle algorithm.
(on page 7-108)
(on page 7-109)
(on page 7-109)
(on page 7-110)
(on page 7-110)
(on page 7-111)
(on page 7-114)
(on page 7-115)
(on page 7-115)
(on page 7-116)
(on page 7-117)
(on page 7-119)
(on page 7-122)
(on page 7-122)
(on page 7-123)
(on page 7-124)
(on page 7-124)
(on page 7-126)
(on page 7-127)
(on page 7-127)
(on page 7-128)
(on page 7-129)
(on page 7-130)
(on page 7-132)
(on page 7-132)
(on page 7-136)
Summary of Contents for 2657A
Page 3: ......