manualshive.com logo in svg

Keithley 2600a series, Reference Manual, Page: 412 / 696

Share
Download
Keithley 2600a series Reference Manual Download Page 412

19-90

Return to 

Section Topics

2600AS-901-01 Rev. B / September 2008

Section 19: Remote Commands

Series 2600A System SourceMeter® Instruments Reference Manual

localnode.prompts4882

 

Attribute

Controls the generation of prompts for IEEE-488.2 common commands.

Default

1

TSP-Link 
accessibility

This attribute can be accessed from a remote TSP-Link node.

Usage

localnode.prompts4882 = prompting

prompting = localnode.prompts4882

prompting

 IEEE-488.2 prompting mode.

Remarks

• When

 localnode.prompts4882

 is set to 1, the IEEE-488.2 common commands will 

generate prompts if prompting is enabled with the 

localnode.prompts 

attribute.

• When 

localnode.prompts4882

 is set to 0, IEEE-488.2 common commands will not generate 

prompts.

• When using the

 *trg 

command with a script that executes trigger.wait repeatedly, setting 

localnode.prompts4882

 to 0 will avoid problems associated with the command interface 

input queue filling.

• If 

localnode.prompts4882

 is set to 1, limit the number of 

*trg 

commands sent to a running 

script to 50 regardless of the setting of the 

localnode.prompts

 attribute.

• The default value for 

localnode.prompts4882

 is 1. It will reset to the default value each time 

the unit is powered up.

localnode.reset

 

Function

Resets the local node.

TSP-Link 
accessibility

This function can be accessed from a remote TSP-Link node.

Usage

localnode.reset()

  

-- Resets the local node.

Remarks

• This function resets the local node instrument.
•

localnode.reset

 is different from 

reset()

 because 

reset()

 resets the entire system.

Also see

reset

Example

Reset the local node: 

localnode.reset()

localnode.revision

 

Attribute

The firmware revision number of the instrument.

TSP-Link 
accessibility

This attribute can be accessed from a remote TSP-Link node.

Usage

revision = localnode.revision

  

-- Reads the firmware revision number.

revision

The revision number. 

Remarks

• This attribute indicates the firmware revision number currently running in the instrument.

Also see

localnode.description

, 

localnode.model

, 

localnode.serialno

Summary of Contents for 2600a series

























































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments