manualshive.com logo in svg

Keithley 2600a series, Reference Manual, Page: 407 / 696

Share
Download
Keithley 2600a series Reference Manual Download Page 407

2600AS-901-01 Rev. B / September 2008

Return to 

Section Topics

19-85

Series 2600A System SourceMeter® Instruments Reference Manual

Section 19: Remote Commands

localnode

Use the attributes and functions in this section to set the power line frequency, control prompts (on 
and off), control error messages, (show

 

and hide), to access global variables, and to run test 

scripts.

There are two different ways to use the 

localnode 

object. 

•

Send commands from the local node.

•

Send commands from a remote node.

To send commands from the local node, use the

 localnode

 element: 

localnode.linefreq = 50

NOTE Use the node reference to send commands from a remote node, do 

not use the 

localnode

 element. 

node[n].linefreq = 50

NOTE Some 

localnode

 commands cannot be run on the local node. They 

must be run from a remote node.

localnode.autolinefreq

 

Attribute

Automatic power line frequency detection control.

TSP-Link 
accessibility

This attribute can be accessed from a remote TSP-Link node.

Usage

flag = localnode.autolinefreq-- 

Read auto line frequency detection 

 

-- setting.

localnode.autolinefreq = flag

-- Set auto line frequency detection

-- mode.

flag

The auto line frequency detection setting.

Set 

flag

 to one of the following values:

true

Enable automatic line frequency detection at start-up.

false

Disable automatic line frequency detection at start-up.

Remarks

• When this attribute is set to 

true

, the power line frequency is detected automatically the next 

time the Series 2600A powers up.

• After the power line frequency is automatically detected at power-up, the 

localnode.linefreq 

attribute will be set automatically to 50 or 60.

• If  the 

localnode.linefreq 

attribute is explicitly set, 

 

localnode.autolinefreq

 will be automatically set to 

false

.

Also see

localnode.linefreq

Example

Disable automatic power line frequency detection: 

localnode.autolinefreq = false

Summary of Contents for 2600a series

























































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments