Instructions for use EXPERTsurg LUX – 1.008.3500
5 Operation | 5.3 Surgical motor INTRA LUX S600 LED
32 / 68
5.3.1 Attaching the straight or contra-angle handpiece
CAUTION
Changing the straight and contra-angle handpieces during operation.
Wear to the catch pin on the straight and contra-angle handpiece and motor.
Unbalanced motor axis.
4
Replace straight and contra-angle handpieces only when the motor is not
running.
NOTE
Following instructions for use, service instructions and assembly instructions
in the motor, handpiece and contra-angle handpiece packaging.
All straight and contra-angle handpieces with INTRAmatic connection according
to DIN EN ISO 3964 can be attached.
4
Place the KaVo handpiece on the motor, lightly press it against the motor
while turning it slightly in the direction of the arrow until the guide stud can
be heard to lock into place.
4
Pull on the KaVo handpiece to make sure that the KaVo handpiece is se-
curely attached to the motor.
4
Route the coolant hose
③
from the unit along the motor cable (clips) and
connect it to the straight or contra-angle handpiece
①
. Place the coolant
hose
③
into the holding ring
②
for this purpose.
1
2
3
5.3.2 Removing the straight or contra-angle handpiece
CAUTION
Changing the straight and contra-angle handpieces during operation.
Wear to the catch pin on the straight and contra-angle handpiece and motor.
Unbalanced motor axis.
4
Replace straight and contra-angle handpieces only when the motor is not
running.
Summary of Contents for 1.008.3500
Page 1: ...Instructions for use EXPERTsurg LUX 1 008 3500...
Page 67: ......
Page 68: ...1 010 3558 bd 20220901 11 en...
