Instructions for use EXPERTsurg LUX – 1.008.3500
7 Run a software update
53 / 68
7 Run a software update
Please proceed as follows to update the software:
4
Download the current firmware file from www.kavo.com/uk/expertsurg.
4
Copy the firmware file to an SD card (storage capacity 1 - 32 GB, FAT
format).
4
Turn the device off.
4
Insert the SD card bearing the new firmware file into the unit. Make sure
that only a single firmware file with the .bin file extension (the downloaded
current file) is stored on the SD card.
4
Turn the device on.
ð
The update process starts automatically.
NOTE
The unit must not be turned off during the update process.
After the update process, the unit starts using the updated software.
CAUTION
Malfunctions of the unit.
The software version displayed on the start screen or in the version display
must coincide with the software version that was downloaded.
4
If these do not coincide or if there is any other error, please contact Cus-
tomer Service.
Also refer to:
5.2 Make the device settings, Page 29 (Version)
NOTE
All programme and device settings remain unchanged.
Summary of Contents for 1.008.3500
Page 1: ...Instructions for use EXPERTsurg LUX 1 008 3500...
Page 67: ......
Page 68: ...1 010 3558 bd 20220901 11 en...
