KaVo 1.008.3500 Instructions For Use Manual Download Page 23

Page: 23 / 68

Instructions for use EXPERTsurg LUX – 1.008.3500

4 Startup | 4.5 Connecting the coolant container and hose set

23 / 68

①

Motor coupling

③

Handpiece holder

②

Surgical motor

④

Plug of motor cable

Plug the surgical motor

②

into the motor coupling

①

and secure it with a

union nut. Please note the separate instructions for use of the motor.

Place the surgical motor on the handpiece holder

③

Insert the plug of the motor cable

④

into the connector on the device, align

the marker points, and insert the plug until it snaps into place.

4.5 Connecting the coolant container and hose set

CAUTION

Running, open hose pump.

Risk of injury.

Turn off the device before opening the hose pump!

CAUTION

Danger of tipping due to the coolant containers being too heavy.

Malfunctions.

Use coolant containers with a maximum volume of 1 litre only.

Check the stability.

Summary of Contents for 1.008.3500





































































Search results

Summary of Contents for 1.008.3500

Reviews:

Brands by name

Popular brands

KaVo 1.008.3500, Instructions For Use Manual

Search results

Summary of Contents for 1.008.3500

Reviews:

Brands by name

Popular brands