34 from 56
Sikaflex
®
-291i – Safety Data Sheet
Sikaflex®-291i
02.12.2010 3/5
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Ingredient name
Occupational exposure limits
Recommended monitoring
procedures
If this product contains ingredients with exposure limits, personal, workplace
atmosphere or biological monitoring may be required to determine the effectiveness
of the ventilation or other control measures and/or the necessity to use respiratory
protective equipment. Reference should be made to European Standard EN 689 for
methods for the assessment of exposure by inhalation to chemical agents and
national guidance documents for methods for the determination of hazardous
substances.
Respiratory protection
:
No exposure limit value known.
Occupational exposure
controls
:
Good general ventilation should be sufficient to control worker exposure to airborne
contaminants. If this product contains ingredients with exposure limits, use process
enclosures, local exhaust ventilation or other engineering controls to keep worker
exposure below any recommended or statutory limits.
Wash hands, forearms and face thoroughly after handling chemical products, before
eating, smoking and using the lavatory and at the end of the working period.
Appropriate techniques should be used to remove potentially contaminated clothing.
Wash contaminated clothing before reusing.
Exposure controls
Hygiene measures
:
Hand protection
Chemical-resistant, impervious gloves complying with an approved standard should
be worn at all times when handling chemical products if a risk assessment indicates
this is necessary. Recommended: Butyl rubber/nitrile rubber gloves.
Safety eyewear complying with an approved standard should be used when a risk
assessment indicates this is necessary to avoid exposure to liquid splashes, mists,
gases or dusts.
Eye protection
:
Skin protection
Personal protective equipment for the body should be selected based on the task
being performed and the risks involved and should be approved by a specialist before
handling this product. Recommended: Use barrier skin cream.
:
Environmental exposure
controls
:
Emissions from ventilation or work process equipment should be checked to ensure
they comply with the requirements of environmental protection legislation. In some
cases, fume scrubbers, filters or engineering modifications to the process equipment
will be necessary to reduce emissions to acceptable levels.
No special measures required.
PHYSICAL AND CHEMICAL PROPERTIES
Form
Solubility
Paste.
Insoluble in the following materials: water
Faint odour.
Odour
Various.
Colour
Flash point
Closed cup: >150°C (>302°F)
9.
:
:
:
:
:
General information
Appearance
Important health, safety and environmental information
Density
:
~1.34 g/cm
3
[20°C (68°F)]
Hazardous decomposition
products
Conditions to avoid
No specific data.
STABILITY AND REACTIVITY
Under normal conditions of storage and use, hazardous decomposition products
should not be produced.
The product is stable.
Stability
10.
No specific data.
:
:
:
Materials to avoid
:
Date of issue
:
3/5
131725
MSDS no. :
02.12.2010.
