6 from 56
3
Proper Use
3.1
Proper use (use for the intended purpose)
The MobiSet 4 CAP 920 is designed to receive digital TV and radio programs via satellite. The automatic
positioner is intended to be used as a turntable for the Kathrein satellite dish.
The turntable can be used to receive digital TV and radio signals in the frequency range from 10.70 to 12.75
GHz; the antenna cannot receive terrestrial signals (e.g. DVB-T).
The turntable can only be operated in conjunction with the UFS 946/CI+ (or UFS 740 and UFS 940)
DVB-S receiver.
In conjunction with this receiver, the turntable provides fully automatic alignment of the satellite dish to
receive digital satellite signals. The turntable is designed for use on stationary caravans or motor homes.
Any use other than that specified above will invalidate the warranty or guarantee.
The following circumstances result in the loss of all warranty and liability claims towards the
manufacturer:
●
Improper installation
● Use of non-specified mounting materials, which cannot guarantee the mechanical reliability of the
antenna system
● Impermissible use, e.g. use of the reflector dish for storage
●
Structural changes or interference with the components and mounting accessories in the set, which
could endanger both the mechanical and functional reliability
●
Improper or forcible opening of the components
●
Use of cleaners containing solvents, such as acetone, nitro-cellulose thinners, petrol, etc.
●
Failure to observe installation and safety instructions in this manual
Note
The maximum permissible speed for vehicles with a CAP 920 receiver unit mounted on the roof is
130 km/h. Before commencing a journey, the antenna must always be lowered into horizontal position
(park position).
Important
The turntable may be operated over an ambient temperature range of from –20 °C to +45 °C. Oper
-
ating the system outside this range may result in malfunctions or damage to the system. When
choosing the location for installation of the UFS 946/CI+ ensure there is adequate ventilation.
The system may be installed only by qualified specialist
personnel.
To prevent hazards during installation, operation or when driving on public highways, the instructions and
information in this manual must be strictly adhered to. Proper installation and connection of the system
are pre-requisites for conformity with the corresponding standards.
This is documented in advance by the CE mark and the declaration of conformity in the appendix to this
manual.
