27 from 56
7
Dismantling for servicing
If repairs to the system or individual components are necessary, contact your specialist dealer or our service
centre (see below for the address).
● The cables laid within the vehicle can remain there.
● Unscrew the six M6 screws securing the turntable to the mounting plate.
● Place two wooden supports on the vehicle roof for protection.
● Then place the turntable on the prepared wooden supports.
● To ship the turntable, use the original packaging which you have saved.
● Seal the opening in the vehicle roof appropriately to protect against the ingress of moisture.
● If an HDZ 100 roof gland has been fitted and the equipment is then removed, the cable glands that are
no longer used should be sealed with the integral plugs. The enclosure is then watertight once again.
Caution
Never open the turntable yourself!!
Caution
Do not cut the cables! At the cable junction provided, disconnect the cables projecting from
the turntable from the two cables laid within the interior of the vehicle (unplug the plug).
7.1
Removing
Note
Before exchanging the UFS 946/CI+ you
must
first move the turntable to the park position.
7.2
Address of the service centre
Factory repair centre
Regional repair centre
Katek Service GmbH
Philipsstrasse 1
35576 Wetzlar
Tel.:
08641 9545-0
Fax:
08641 9545-35 and -36
E-mail:
KATHREIN Sachsen GmbH
Lindenstrasse 3
09241 Mühlau
Tel.:
03722 6073-31
Fax:
03722 6073-18
E-mail:
Main factory repair centre
CSS Caravan-Sat-Service GmbH
Bahnhofstrasse 110
83224 Grassau, Germany
Tel.:
08641 6998427
Fax:
08641 6998429
E-mail:
