![background image](http://html1.mh-extra.com/html/karcher/hds-9-20-4-m-classic/hds-9-20-4-m-classic_manual_4234972012.webp)
12
English
Contents
General notes
Read these original instructions and the
enclosed safety instructions before us-
ing the device for the first time. Act in ac-
cordance with them.
Keep both books for future reference or for future own-
ers.
●
If the operating instructions and safety instructions
are not observed, the device can be damaged and
dangers could arise for users and other persons.
●
Notify the dealer immediately in the case of shipping
damage.
●
Check the package contents when unpacking for
missing accessories or for damage. Scope of deliv-
ery see illustration A.
●
At operating elevations of approx. 800 m above sea
level or higher, please contact your dealer to have
the burner setting adjusted to the elevation and re-
duced oxygen content.
Environmental protection
The packing materials can be recycled. Please
dispose of packaging in accordance with the en-
vironmental regulations.
Electrical and electronic devices contain valua-
ble, recyclable materials and often components
such as batteries, rechargeable batteries or oil,
which - if handled or disposed of incorrectly - can
pose a potential danger to human health and the envi-
ronment. However, these components are required for
the correct operation of the device. Devices marked by
this symbol are not allowed to be disposed of together
with the household rubbish.
Notes on the content materials (REACH)
Current information on content materials can be found
at:
www.kaercher.de/REACH
Supplementary environmental protection
instructions
Please do not allow engine oil, heating oil, diesel and
petrol to enter the environment. Please protect the
ground and dispose of old oil in an environmentally
friendly manner.
Overview of the device
Description of the device
Illustration A
1
Cable clips
2
Water shortage safeguard and safety valve
3
Fuel pump solenoid valve
4
Fuel pump
5
Type plate
6
Burner blower
7
Filling hole for fuel (fuel filler cap)
8
Fuel filter
9
Fuel sieve
10
Fuel tank
11
Electric motor
12
Support for high-pressure gun with spray lance
13
Pressure/quantity regulator of the pump unit
14
Oil level gauge
15
Oil drain screw
16
Oil filler plug
17
Pump unit
18
Power supply cable
19
Fine filter (water), HDS 13/20-4 S Classic: Fine filter
is installed rotated 90° to the rear
20
Burner
21
Water connection
22
Temperature sensor
23
High-pressure connection
24
Hose holder
25
Ignition transformer
26
Steering roller with parking brake
27
High-pressure hose
28
Cover fastening screw
29
Level switch
30
Union nut
31
Empty signal sensor
32
Control panel
33
Cover
34
Trigger
35
High-pressure gun
36
High-pressure nozzle
37
Spray lance
38
Safety latch of the high-pressure gun
39
Brace for crane transport
40
Frame
General notes......................................................
Environmental protection.....................................
Overview of the device ........................................
Symbols on the device ........................................
Intended use........................................................
Safety instructions ...............................................
Safety devices .....................................................
Initial startup ........................................................
Operation.............................................................
Transport .............................................................
Storage................................................................
Care and maintenance ........................................
Troubleshooting guide .........................................
Warranty ..............................................................
Accessories and spare parts ...............................
Declaration of Conformity....................................
Technical data .....................................................
Summary of Contents for HDS 9/20-4 M Classic
