background image

English

21

Troubleshooting guide

Malfunctions often have simple causes that you can 
remedy yourself using the following overview. When in 

doubt, or in the case of malfunctions not mentioned 
here, please contact your authorized Customer Service.

Error

Cause

Rectification

The engine does not 
start.

Various causes possible.

1. See the operating instructions of the en-

gine.

The engine has insuffi-
cient power.

Various causes possible.

1. See the operating instructions of the en-

gine.

High-pressure pump not 
building up pressure.

The engine speed is too low.

1. Check the operating speed of the engine 

and correct if necessary, see the operating 
instructions for the engine.

The black jet nozzle (SOAP) is installed 
on the spray lance.

1. Replace the black jet nozzle (SOAP) with 

the white, green, yellow or red jet nozzle, 
see chapter 

 Changing the jet nozzle

.

The white, green, yellow or red jet nozzle 
is damaged, blocked or washed out.

1. Clean the white, green, yellow or red jet 

nozzle, see chapter 

 Cleaning the jet noz-

zle (if necessary)

or replace it.

The water sieve is dirty.

1. Clean the device water sieve, see chapter 

 

Cleaning the water sieve (monthly)

.

Air in the system.

1. Vent the device, see chapter 

 Vent the de-

vice

.

The water supply quantity is too low.

1. Open the water tap completely.
2. Check the water supply quantity and in-

crease if necessary, see chapter 

 Technical 

data

.

Supply lines to high-pressure pump leak-
ing or clogged.

1. Check the supply lines to the high-pressure 

pump for blockages, damage and leaks 
and replace if necessary.

Strong pressure fluctua-
tions.

The jet nozzle is dirty.

1. Clean the jet nozzle, see chapter 

 Cleaning 

the jet nozzle (if necessary)

.

The water supply quantity is too low.

1. Open the water tap completely.
2. Clean the device water sieve, see chapter 

 

Cleaning the water sieve (monthly)

.

3. Check the water supply quantity and in-

crease if necessary, see chapter 

 Technical 

data

.

Device leaking.

Minor leakage due to technical reasons. 1. Minor leakage of the device can occur due 

to technical reasons and is not a cause for 
concern.

Major leakage.

1. Contact the authorized Customer Service.

High-pressure hose or 
connections leaking.

The high-pressure hose is damaged.

1. Shut the device down immediately and re-

place the high-pressure hose.

The sealing rings of the high-pressure 
hose are damaged or worn.

1. Replace the sealing rings on the high-pres-

sure hose, see chapter 

 Replacing the 

sealing rings on the high-pressure hose 
and high-pressure gun (if necessary)

.

The high-pressure gun sealing ring is 
damaged or worn.

1. Replace the high-pressure gun sealing ring 

with a new one, see chapter 

 Replacing the 

sealing rings on the high-pressure hose 
and high-pressure gun (if necessary)

.

The union nut on the water spigot is 
loose.

1. Hand-tighten the union nut on the water 

spigot with an open-end wrench, see chap-
te

 Installing the coupling plug on the water 

spigot

.

The high-pressure pump 
knocks.

The supply lines to the high-pressure 
pump are leaking.

1. Check the supply lines to the high-pressure 

pump for leaks and replace if necessary.

Air in the system.

1. Vent the device, see chapter 

 Vent the de-

vice

.

Summary of Contents for G3200

































Reviews: