background image

English

15

pressure cleaner is operated is equipped with a system 
separator in accordance with EN 12729 type BA.

 

● 

Wa-

ter that has passed through a system separator is no 
longer considered drinking water.

 

● 

Never leave the de-

vice unattended while it is in operation. 

 

● 

A recoil force 

acts on the high-pressure gun due to the outgoing water 
stream at the high-pressure nozzle. Ensure a secure 
footing and hold the high-pressure gun and spray lance 
firmly. 

 

● 

Accidents or damage caused by the device fall-

ing over. You must ensure stability before all activities 
with or on the device.

ATTENTION

 

● 

Only use the device on surfaces 

that are not sensitive to moisture.

 

● 

First check the ef-

fectiveness of the device in an inconspicuous place, es-
pecially on sensitive surfaces such as wood.

 

● 

Do not 

operate the device at temperatures below 0 °C.

Operation with detergent

WARNING

 

● 

Incorrect use of detergents can 

cause serious injury or poisoning.

CAUTION

 

● 

Keep detergents out of reach of 

children.

 

● 

Use only the detergents supplied or recom-

mended by the manufacturer. The use of other deter-
gents or chemicals may affect the safety of the device.

Care and service

WARNING

 

● 

Before carrying out any care and 

maintenance work, switch off the engine, let it cool down 
and remove the spark plug cap from the spark plug.

CAUTION

 

● 

Have repair work and work on 

electrical components carried out only by authorized 
Customer Service personnel.

ATTENTION

 

● 

Do not use acetone, undiluted ac-

ids or solvents, as they would attack the materials used 
on the device.

Transport

CAUTION

Risk of accident and injury. Observe the weight of the 
unit during transport and storage, see chapter Tech-
nical data in the operating instructions.

Environmental protection

The packing materials can be recycled. Please 
dispose of packaging in accordance with the en-
vironmental regulations.
Electrical and electronic appliances contain valu-
able, recyclable materials and often components 
such as batteries, rechargeable batteries or oil, 
which - if handled or disposed of incorrectly - can 

pose a potential threat to human health and the environ-
ment. However, these components are required for the 
correct operation of the appliance. Appliances marked 
by this symbol are not allowed to be disposed of togeth-
er with the household rubbish.
Cleaning work which produces waste water containing 
oil, e.g. engine or underbody washing, may only be car-
ried out at washing stations with oil separators.
Work with detergents may only be carried out on liquid-
tight work areas with a connection to the sewage sys-
tem. Do not allow detergents to penetrate water or soil.

Notes on the content materials (REACH)

Current information on content materials can be found 
at: 

www.kaercher.de/REACH

Intended use

DANGER

Use at gas stations or other hazardous areas

Danger of injury
Adhere to the respective safety regulations.

Note

Do not allow waste water containing mineral oil to pen-
etrate soil, waterways or the sewage system. Only wash 
the engine or the undercarriage in suitable places with 
an oil separator.

The high-pressure cleaner is only intended for use in 
private households.
Never operate the device in confined spaces.
The device is intended for cleaning machines, vehicles, 
buildings, tools, facades, terraces, garden machines 
etc. using a high-pressure water jet.

Accessories and spare parts

Only use original accessories and original spare parts. 
They ensure that the appliance will run fault-free and 
safely.
Information on accessories and spare parts can be 
found at 

www.kaercher.com

.

Scope of delivery

The scope of delivery for the appliance is shown on the 
packaging. During unpacking, check the contents for 
completeness. If any accessories are missing or in the 
event of any shipping damage, please notify your deal-
er.

Description of the device

For illustrations, refer to the graphics pages

Illustration A

1

Detergent suction hose

2

High-pressure spigot

3

Type plate

4

Device frame

5

Ring

6

Handle

7

Jet nozzle
Low-pressure jet:

Black (SOAP)

High-pressure jet:

White, 40° jet angle

Green, 25° jet angle

Yellow, 15° jet angle

Red, 0° jet angle

8

Hook and loop strip

9

High-pressure gun

10

High-pressure gun holder

11

High-pressure hose

12

Lid

13

Detergent tank

14

Spray lance

15

Wheel

16

Jet nozzle coupling

Summary of Contents for G3200

































Reviews: