![background image](http://html1.mh-extra.com/html/karcher/brc-40-22-c/brc-40-22-c_instructions-manual_3585819011.webp)
-
4
We hereby declare that the machine de-
scribed below complies with the relevant
basic safety and health requirements of the
EU Directives, both in its basic design and
construction as well as in the version put
into circulation by us. This declaration shall
cease to be valid if the machine is modified
without our prior approval.
The signatories act on behalf of and with of
the authority of the company management.
Documentation supervisor:
S. Reiser
Alfred Kärcher SE & Co. KG
Alfred-Kärcher-Straße 28-40
71364 Winnenden (Germany)
Tel.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2019/01/01
We hereby declare that the product de-
scribed below complies with the relevant
provisions of the following UK Regulations,
both in its basic design and construction as
well as in the version put into circulation by
us. This declaration shall cease to be valid
if the product is modified without our prior
approval.
The signatories act on behalf of and with of
the authority of the company management.
Documentation supervisor:
S. Reiser
Alfred Kärcher SE & Co. KG
Alfred-Kärcher-Straße 28-40
71364 Winnenden (Germany)
Tel.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2019/01/01
The warranty terms published by our com-
petent sales company are applicable in
each country. We will repair potential fail-
ures of your accessory within the warranty
period free of charge, provided that such
failure is caused by faulty material or de-
fects in fabrication. In the event of a warran-
ty claim please contact your dealer or the
nearest authorized Customer Service cent-
er. Please submit the proof of purchase.
Only use original accessories and spare
parts, they ensure the safe and trouble-free
operation of the device.
For information about accessories and spare
parts, please visit www.kaercher.com.
Faults without display
Failure
Correction
Appliance cannot be started
Insert the mains plug into the socket.
Is the indicator light voltage supply on?
Reset the overload fuse by pressing it in.
Check facility fuse.
Insufficient vacuum performance
Empty the waste water tank and clean the sieve with the float ball.
Clean the vacuum bar
Check the seals on waste water tank and sight glasses.
Check suction hose for blockages; clean if required.
Check the suction hose for tightness; replace if required.
Insufficient water quantity
Clean or replace the nozzles.
Clean the detergent solution filter.
Brush does not turn
Turn the program selection switch to the desired programme.
Check if foreign objects block the brush; remove foreign object if required.
Technical specifications
Power
Nominal voltage
V
220-240
Frequency
Hz
1~, 50/
60
Type of protection
IPX4
Average power consump-
tion
W
1800
Rated power suction tur-
bine
W
1200
Rated power brush drive W
400
Vacuuming
Vacuum power, air vol-
ume (max.)
l/s
27
Vacuuming power, nega-
tive pressure (max.)
kPa
(mbar)
29 (290)
Pump for detergent solution
Intermediate cleaning
l/min
0,38
MPa
0,35
Basic cleaning
l/min
2,5
MPa
0,69
Cleaning brushes
Brush speed
1/min 1100
Brush diameter
mm
96
Dimensions and weights
Theoretical surface
cleaning performance
m²/h
2000
Max. working range in-
cline
%
2
Fresh/waste water tank
volume
l
22/19
Max. water temperature °C
50
Ambient temperature
°C
5...40
Net weight (transport
weight)
kg
42,6
Total weight (ready to op-
erate)
kg
64,6
Dimensions (L x W x H) mm
889 x
470 x
1118
Values determined as per EN 60335-2-
72
Total oscillation value
m/s
2
<2,5
Sound pressure level L
pA
dB(A) 74
EU Declaration of Conformity
Product:
Scouring and vacuum ma-
chine
Type:
1.008-xxx
Relevant EU Directives
2006/42/EG (+2009/127/EG)
2014/30/EU
2011/65/EU
Applied harmonized standards
EN 60335–1
EN 60335–2–68
EN 55014-1:2006 + A1: 2009 + A2:2011
EN 55014-2:1997 + A1: 2001 + A2: 2008
EN 61000–3–2: 2014
EN 61000–3–3: 2013
EN 62233: 2008
Applied national standards
-
Declaration of Conformity
Chairman of the Board of Management
Director Regulatory Affairs & Certification
Product:
Scouring and vacuum ma-
chine
Type:
1.008-xxx
Currently applicable UK Regulations
S.I. 2008/1597 (as amended)
S.I. 2016/1091 (as amended)
S.I. 2012/3032 (as amended)
Designated standards used
EN 60335–1
EN 60335–2–68
EN 55014-1:2006 + A1: 2009 + A2:2011
EN 55014-2:1997 + A1: 2001 + A2: 2008
EN 61000–3–2: 2014
EN 61000–3–3: 2013
EN 62233: 2008
National standards used
-
Warranty
Accessories and Spare Parts
Chairman of the Board of Management
Director Regulatory Affairs & Certification
11
EN
Summary of Contents for BRC 40/22 C
