D E F I N I N G S E T T I N G S
To enable error reporting at the program start,
type
Yes
in the
Othermessages
line of the
[Customize]
section of a profile.
Otherwise, type
No
.
To be asked for confirmation when enabling the redundant
scanning tool,
type
Yes
in the
Redundantmessage
line of the
[Customize]
section of a
profile. Otherwise, the program will be enabling the redundant scanning
tool without the confirmation.
The setting will be used only for that location to be checked, which
has a positive value (Yes) in the
Redundantscan
line of the
[Object]
section.
To be asked for confirmation when deleting an infected object,
type
Yes
in the
Deleteallmessage
line of the
[Customize]
section of a
profile. If you type
No
, the program will be deleting the objects without
the confirmation.
The setting will be used only for that location to be checked, which
has the value 3 in the
InfectedAction
line of the
[Object]
section.
To shut down the program when the corrupted virus-definition
databases are detected,
type
Yes
in the
ExitOnBadBases
line of the
[Customize]
section of a
profile. Otherwise, type
No
.
To be reported about the performance results using the
extended exit codes,
type
Yes
in the
Useextendedexitcode
line of the
[Customize]
section of a
profile. Otherwise, type
No
.
Defining general settings for the scanning operations
To skip data on the removable disks while checking for viruses
in the entire filesystem (by default this type of data media is
also checked),
51
