W E B T U N E R
To notify the administrator about the required object type
detected and to attach the original message to the notification,
follow these steps:
1. Check
the
Send notify
check box for the corresponding
object type;
2. Enter the e-mail address or the alias of the administrator in
the
Group administrator address
text field.
Let's review the following example for training purposes:
?
Example
: If the Keeper program fails to disinfect a message that
belongs to this address group, you want it to send the appropriate
notification to the administrator with the original message attached to
it and copy the message to the isolation directory.
Solution: To set your Keeper to perform the required tasks, switch to
the
administrator
page and follow the steps:
1. Check
the
Isolator
and
Send notify
check boxes for the
Infected
object type.
2. Enter the e-mail address or the alias of the administrator in
the
Group administrator address
text field.
3. Select
Unchanged
from the
Object action
drop-down list for
the
Infected
object type.
4. Enter the full path to the isolation directory in the
Isolator
path
text field. You can do this manually or by using the
Browse
button.
10.10.3.5.
The Group: window sender
page: notifications for the sender
The
sender
page (see Figure 47) allows you to define the sender
notification settings.
On this page, you may define the following settings:
•
the sender notification settings for every object type (the
Object
type
list on this page is similar to the one located on the
administrator
page);
170