T U N E R
Scan delay
– enter the interval between two loops (in seconds). This
parameter is used only if you checked
Endlessly scan
check
box.
If the
Scan delay
value is equal to
0
, there will be no interval between
the loops!
9.7. The Report page
Options located on the Report page.
Options on the
Report
page of the Tuner main window (see Figure 16)
allow you to define the format and the contents of the program reports.
The
Report
page corresponds to the
[Report]
section of a profile.
Figure 16. The
Report
page
On this page you can define the following reporting settings:
Report file
—
check this box to enable the program to add
check-results to a file. In the below text field define the file name.
By default the log file name is
report.txt
.
Use syslog
— check the box to log the performance reports in
the system log.
109
