D E F I N I N G S E T T I N G S
To check for viruses in plain mail files,
type
Yes
in the
MailPlain
line of the profile. Otherwise, type
No
.
This parameter corresponds to the command line switch
-MP[-]
. The
switch
-MP
enables and the switch
-MP-
disables your anti-virus
scanner to check for viruses in plain mail files.
While scanning plain mail files
Kaspersky Anti-Virus for Sun
Solaris Mail Server
searches in every file for the message header,
and then checks for viruses in the attached data (UUEncode,
XXEncode etc.).
5.3.2.7. Embedded OLE objects
To check for viruses in OLE objects embedded in the examined
files,
type
Yes
in the
Embedded
line of the profile. Otherwise, type
No
.
5.3.3. Defining anti-virus actions
In the appropriate lines of the
[Object]
section of a profile you can define
actions that should be taken on infected, suspicious and corrupted objects
if these are detected.
If
Kaspersky Anti-Virus for Sun Solaris Mail Server
reported
some suspicious file or sector, it’s advisable that you contact our
help desk department. Send these objects to Kaspersky Lab, so that
they could be studied (for example, you may use the address
). It’s advisable that you archive suspicious
objects and password the archive prior to sending them to
Kaspersky Lab or delivering to the distributor together with the
archive password.
To define actions to be taken on infected, suspicious and
corrupted objects,
enter one of the following values for the
InfectedAction
parameter of the
profile:
44
