Kantech KT-1, Installation Manual

Page: 16 / 50

Integration Interface
The KT-1 supports alarm panel interfacing with the appropriate connections made
between zone inputs, relay outputs and the alarm system panel. The KT-1-PCB ver-
sion also supports integration interfacing using RS-232 for fire alarm panel and intru-
sion integrations.
Note: RS-232 interface communication with fire alarm panel has not been eval-
uated by UL.
Automatic Port Detection
The KT-1 automatically detects the site communication speed set by EntraPass as
well as the communication port which can be IP (ETHERNET) or RS-485 (COM1).
Downloadable Firmware
The firmware program can be downloaded from any EntraPass workstation to the
KT-1. It is stored in the controller’s flash memory, and is upgraded without having to
change any parts.
Trouble and Reporting
The KT-1 continuously monitors its power and reports low and critical power issues.
Power outputs are monitored and electronically protected against short-circuits
and surges. Locking devices are also monitored for short and open circuits.
© Copyright, 2016, all rights reserved
16