3.Display Description and Operation Procedure
31
Tap [STOP] to stop a measurement.
Tap
button while measuring to
display a chart.
When a measurement at each measurement
point is finished, the measurement
will be
displayed.
Tap [NEXT] to display “CONFIRM” screen
which informs you of the next measurement
point then wait for the next measurement.
Tap [REMEASURE] to perform another
measurement at this measurement point.
Tap [PRINT] to print the measurement
results.
When all of the measurements are finished,
a final measurement result will be displayed.
You can view the results of a certain
LOCATION by selecting a Location from the
dropdown list of [Location].
Tap [CLOSE] to end the measurement.
Tap
[REMEASURE]
to
perform
a
measurement
again
at
the
last
measurement point.
Tap [PRINT] to print measurement results
of the last measurement point.
Every time you tap this button, the
particle unit changes in the order of:
p
p/cf
p/m³
.
Use this button to select either
Total display or Single display.
(Only applicable for RAW DATA)
