3.Display Description and Operation Procedure
47
3.7 FILE
Select [FILE] on the initial screen. Then a screen
shown to the left will be displayed. You can display,
print and delete data here. You can also display the
list
of
files
that
has
been
outputted
in
the
ALARM/ERROR LOG screen.
*User needs to have authorization to copy files.
*User needs to have authorization to delete
files.
The file name consists of an abbreviation of the
measurement mode + Date + Time.
The measurement mode abbreviations are;
(a) To display names of every saved file,
check “OPEN”. (When this screen is
open, “OPEN” is selected by default.)
(b) Use “MEASURE MODE” to narrow down the files
to be displayed.
(c) After you select the file that you want to display,
the file name will be displayed in the box for
“FILE NAME”. Then tap [OK] to open the data
display screen as shown below.
Tap CALC DATA tab to display CALC result.
Tap SETTING tab to display the setting information.
(e) To delete the displayed file, tap [DELETE]. A dialog will be
displayed asking you if you want to delete it or not. Tap
[YES] to delete the file displayed.
(f) Tap [PRINT] to print the data.
(g) Tap [CLOSE] to close a window.
(h) In STATS mode and STANDARD mode, you can change the
data to be displayed by selecting LOCATION.
Data Display Screen
(a)
(b)
(c)
SG: SINGLE
FS: FEDERAL STANDARD
CO: CONTINUOUS
BS: BRITISH STANDARD
IN: INTERVAL
EC: EC GMP
ST: STATS
GB: GB/T
IS: ISO
<CALC TAB DATA>
(e)
(f)
(g)
(h)
<SETTING TAB>
(e)
(f)
(g)
(h)
<RAW DATA TAB>
(h)
(e)
(f)
(g)
