3.Display Description and Operation Procedure
57
·
SOUND
In the SOUND settings, you can configure the
sound volume and sound type.
Default Sound:
Set the sound for erroneous operation. When this item is unchecked, this sound function will be
off.
Tap Sound:
Set the tap sound on the screen. When this item is unchecked, there will be no tap sound.
Alarm Sound:
Set the sound for the Alarm. When this item is unchecked, there will be no alarm sound.
Tap [OK] to save the settings and close the window (
Authentication required
).
Tap [CANCEL] to discard the configured settings (Previous settings will be applied).
· COMMUNICATION
In the COMMUNICATION SETTING, configure the
settings for Ethernet connection. This settings
need to be configured when connecting the
instrument to a PC using remote console or remote
mode.
For the HOST NAME, enter a name to identify the
instrument when it is connected to a network or
workgroup by Ethernet. (Be sure not to use the
same name as other PCs or devices on the network
or workgroup.)
For IP ADDRESS, check AUTO to acquire an IP ADDRESS automatically. If AUTO is unchecked,
enter IP Address, NET MASK and DEFAULT Gateway.
Tap [OK] to save the settings and to close the window (
Authentication required
).
Tap [CANCEL] to discard the configured settings (Previous settings will be applied).
You can use any Windows standard WAV format file for the
sound functions.
Create a folder named “Sound” on the USB flash drive.
Then copy the WAV file(s) in the folder. You will be able to
select the file from the list as long as the USB flash drive is
installed
(* is added to all of the WAV file names on the
USB flash drive).
Selected WAV files are transferred to internal data
storage. Therefore, after selecting the files and choosing
[OK], you can remove the MMC card.
