Kanomax 2212 User Manual Download Page 7

Page: 7 / 52

2. Getting Started

2. Getting Started

2.1 Installing Batteries

4. Insert batteries ensuring the battery polarity is correct. This instrument

requires six (6) AA size batteries. Types of batteries that can be used

are:

Manganese (R6), Alkaline (LR6) or Ni-Cd batteries.

The six (6) batteries must be of the same type. Do NOT mix different

types of batteries. Mixing different types of batteries or incorrect

battery polarity may cause battery leakage or damage to the instrument.

* Batteries CANNOT be recharged by the (optional) AC adapter.

3. Lift the cover away from the instrument.

1. Press down the battery cover with your

finger as shown left.

Slide the cover toward the bottom of the instrument.

5. Put the cover back on by reversing the above procedure.

Types of batteries that can be used

Manganese (R6), AA batteries

Alkaline (LR6), AA batteries

Ni-Cd, AA batteries

Backside of the instrument

Summary of Contents for 2212





















































Search results

Summary of Contents for 2212

Reviews:

Kanomax 2212, User Manual, Page: 7 / 52

Search results

Summary of Contents for 2212

Reviews: