Kanomax 2212 User Manual Download Page 34 | Manualshive

Page: 34 / 52

Kanomax 2212 User Manual Download Page 34

7. Other Settings

31

7.3 Deleting Data

7.3.1 To Delete Certain Pages of Data

When data is deleted partially, data is deleted per page. One measurement taken in CALCULATION MODE or

% OUTDOOR AIR (%OA) MODE is stored in one page.

Display

Procedure

Press

key to bring up the MENU screen.

Use

key to select “5. DATA CLEAR” and press

key.

Use

key to select “1. CLEAR” (to delete only the specified

data), and press

key.

Use

key to select the first page to be deleted, and press

key.

Use

key to select the last page to be deleted, and press

key.

Use

key to select “YES” to delete the selected pages, and press

key.

The selected page will be deleted and the subsequent page number will be
shifted up.
EX) There are data from page 1 to page 4. If the 3

rd

page is deleted, the

data in the 4

th

page will be shifted up to the 3

rd

and the data from page1 to

page3 will be remained.

Page 1
Page 2
Page 3
Page 4

Page 1
Page 2
Page 4

Page 1
Page 2
Page 3

Page Number will be changed automatically

The first page to be deleted
The last page to be deleted
Delete partially (YES or NO)
Delete all (YES or NO)

Remaining Memory/Total Memory

(It shows the number of measurement data.)

«
...
32
33
34
35
36
...
»

Summary of Contents for 2212





















































Reviews:

No comments