manualshive.com logo in svg

Kanomax 2212, User Manual, Page: 11 / 52

Share
Download
Kanomax 2212 User Manual Download Page 11

2. Getting Started 

 

 

8 

<Atmospheric Pressure Correction> 

 

When atmospheric pressure at a measuring site is abnormal (such as at high altitude), follow steps below to set 

atmospheric pressure (default setting: 1013hPa).

 

 

Since the change of weather does not significantly affect the atmospheric pressure as long as the measuring site 

is same (excluding the case of typhoon), once you set atmospheric pressure, you do not need to set it every time.

 

Display 

Procedure 

 

 

Press          key to bring up the MENU screen.

 

 

Use                  key to select “7.CALIBRATION”, and press          key. 

 

 
 

 

 

Use                  key to select “4. ATMOS. PRESS SET”, and press          key. 

 

 

Use 

  key to set atmospheric pressure value, and press            key. 

Use 

  key to select “5. SAVE INFO”, and press 

  key to go 

back to the MENU screen and the setting is completed. 

2.5.2 Temperature Measurement Precautions 

 

The  response  time  for  temperature  measurement  improves  as  the  air  flow  increases.  Wait  for  the  reading  to 

become stable before taking the data.   

 

When a  measurement  is performed in  a no-airflow condition, the air temperature reading may become higher 

than the actual due to the heat generated by the lamp. It is recommended that the measurement is performed in 

an environment with at least 0.1m/s airflow to obtain accurate readings.   

2.5.3 Humidity Measurement Precautions 

 

If a measurement is performed in the place where the humidity is high for a long period of time or temperature 

changes  rapidly,  humidity  reading  may  become  exceedingly  high  due  to  dew  condensation.  When  dew 

condensation is built up, leave the probe in the atmosphere of less than 40%RH for 24 hours to dry it out.     

-- Comparison with Assman Aspiration Psychrometer -- 

The quality and accuracy of IAQ Monitor’s humidity measurement function is ensured by strict calibration with 

traceability  in  Japanese  National  Standards  of  JEMIC  (Japan  Electric  Meters  Inspection  Corporation).  This 

instrument provides stable  measurement as  an electronic hygrometer,  so it  can be used as  Assman  Aspiration 

Psychrometer.  Assman  Psychrometer  sometimes  reads  higher  humidity  comparing  to  the  IAQ  Monitor  since 

handling  methods  such  as  how  to  wrap  the  wet  bulb  by  gauze  or  how  to  handle  the  dirt  affect  Assman 

Psychrometer.  Assman  Psychrometer  shall  be  handled  with  care.  For  more  details  on  handling  Assman 

Psychrometer, refer to the Japanese Industrial Standard (JIS) Z 8806 Humidity - Measurement Method. 

Summary of Contents for 2212





















































Reviews:

No comments