Kanomax 2212 User Manual Download Page 5

Page: 5 / 52

1. Part Names and Functions

1.2 Operation Panel

MENU KEY

Press once to access the MENU screen to select the desired feature.

* If pressing this key while measuring or configuring the settings, whatever the operation being conducted

will be cancelled and you will go back to the MENU screen.

…………………………Normal (Measurement) Mode

……………Calculation Mode

…………………………………Percent Outdoor Air Mode

……………To output stored data

………………To delete stored data

………………………To set time, date and measurement unit

……………Calibration Mode

DT
DT

CO
AH

CO
HR

Humidity

Temperature

SET KEY

To execute the selected item.

MODE KEY

To change measurement mode between temperature and humidity.

START/HOLD KEY

- To start and stop calculation and/or measurement.
- To put displayed reading on hold, and press this key again to release hold.

▲,▼

NAVIGATION KEY

In the Normal (Measurement) Mode, this key is used to
change the display item relating to humidity. (See P.9)

In the MENU screen, this key is used to select a desired
item or to set a numeric value

START

HOLD

SET

MODE

IAQ MONITOR

MENU KEY

Press once to access the MENU screen to select the desired feature.

* If pressing this key while measuring or configuring the settings, whatever the operation being conducted

will be cancelled and you will go back to the MENU screen.

…………………………Normal (Measurement) Mode

……………Calculation Mode

…………………………………Percent Outdoor Air Mode

……………To output stored data

………………To delete stored data

………………………To set time, date and measurement unit

……………Calibration Mode

Summary of Contents for 2212





















































Search results

Summary of Contents for 2212

Reviews:

Kanomax 2212, User Manual, Page: 5 / 52

Search results

Summary of Contents for 2212

Reviews: