
3. Measurement
9
3.
Measurement
(NORMAL MODE)
This is the mode that you will see when you turn on the instrument.
In this mode you cannot store any data.
Any displayed readings are updated every 1 second.
3.1 Changing the Measurement Mode
Display
Procedure
1.
Press key when the NORMAL (Measurement) mode screen shown
in the left is displayed.
As
key is pressed, the measurement mode will be switched between
2. (CO
2
, CO,
Temperature) → 1. (CO
2
,
CO, Humidity).
2.
<CO
2
, CO and Humidity Measurement Screen>
Press key when the screen in the left is displayed to change the
humidity related display mode in the sequence of Humidity, 3.Dew-point
Temperature [DT], 4.Wet-bulb Temperature [WB], 5.Absolute Humidity
[AH] and 6.Humidity Ratio [HR].
See P.42 for detailed information on each item.
3.
<Due-point Temperature Measurement Screen>
4.
<Wet-bulb Temperature Measurement Screen>
5.
<Absolute Humidity Measurement Screen>
6.
<Humidity Ratio Measurement Screen>
To move to NORMAL Mode from other measurement mode,
press key to bring up the MENU screen,
select “1. NORMAL” and press key.
Summary of Contents for 2212
Page 52: ...13 Contact Information 49 ...