Kanomax 2212 User Manual Download Page 16 | Manualshive

Page: 16 / 52

Kanomax 2212 User Manual Download Page 16

4. Measuring MAX, AVG and MIN Value

13

Display

Procedure

<While Measuring>

Press

key to stop measuring.

(If “YES” is selected for “4. DATA STORAGE ?”, the measured data will
be stored.)

You can also stop measuring by pressing

key. However, any

measured data will not be stored.

<Calculation Result Display>

After all the measurements are finished, the calculation result will be
displayed.

Use

key to check each parameter in the sequence of CO

2

-> CO

-> Temperature -> Humidity -> Dew-point Temperature (DT) -> Wet-bulb

Temperature (WB) -> Absolute Humidity (AH) -> Humidity Ratio (HR).

As for Dew-point Temperature, Wet-bulb Temperature, Absolute

Humidity, and Humidity Ratio, only average values will be displayed.

Press

key to return to the MENU screen. Calculation data will be

stored when “4.DATA STORAGE” is set to “YES”.

Related Functions:

■ If a printer is connected: press

key to print out calculation result.

■ To redisplay stored data -- P.18
■ To print out measured data -- P.20
■ What is DT, WB, AH, HR? -- P42

«
...
14
15
16
17
18
...
»

Summary of Contents for 2212





















































Reviews:

No comments