Kanomax 2212, User Manual, Page: 22 / 52

6. Data Output 19
Display Procedure
CALCULATION
<Measurement data display screen>
Measurement data of the specified page will be displayed.
Use key to scroll the data.
When a measurement is performed in the CALCULATION mode, press
key to switch to display between Temperature and Humidity.
%OA (Temperature)
%OA (CO
2
)
<To display calculation result>
You can specify the data range for calculation.
(When data range does not need to be changed, press key to display
the calculation result of the data range shown.)
Press key to show a cursor on “START” No.
Use key to select data number where to start calculation
(START), and press key. The cursor will move to “END” No.
Use key to select data number where to end the calculation
(END), and press key.
Press key to display the calculation result of the data range selected.
* You cannot select more than one range.
CALCULATION
TION
%OA
<In CALCULATION mode >
Press key to display calculation result in the sequence of
CO2 -> CO -> Temperature -> Humidity -> DT, WB, AH -> HR.
Only average value is displayed for DT, WB, AH, and HR.
< In %OA mode >
Press key to display the average value of each point in the sequence
of %OA -> R_A -> S_A -> O_A.
Press key to return to the screen for data output page setting screen.
Press key to return to the MENU screen.
Data No. CO
2
CO Temp.
Data No. Return Air Supply Air Outdoor Air
Temp. Temp. Temp.
Data No. Return Air Supply Air Outdoor Air
CO
2
CO
2
CO
2