
4. Measuring MAX, AVG and MIN Value
12
Display
Procedure
<To set CALCULATION MODE>
Use
key to select “1. MODE”, and press
key.
Use
key to select either “AVERAGE” or “INSTANT” and
press
key.
<To set SAMPLING TIME>
Use
key to select “2. SAMPLING TIME”, and press
key.
Use
key to set SAMPLING TIME (1-999sec
)
and press
key.
<To set the number of measurement data>
Use
key to select “3. No. TRIAL (N)”, and press
key.
Use
key to set the number of TRIALs (1-999 times) and press
key.
Data for the number of TRIALs set here will be saved as raw data.
<DATA STORAGE YES/NO>
Use
key to select “4. DATA STORAGE ?”, and press
key.
Use
key to select YES or NO and press
key.
* You CANNOT store more than what is left in the memory. If you set the
number more than the number of remaining data locations, it
automatically adjusts to the amount of remaining memory.
(For example, if the remaining memory is R0020/1500, you can only
measure 20 times at the most.
)
<To save the settings>
Use
key to select “5. SET TO START”, and press
key.
(The display shown in the left indicates that it takes 50 measurements
every 1 second (50 seconds in total).)
<Standby Screen>
This is a standby screen before measurement starts.
Press
key to start measuring.
Summary of Contents for 2212
Page 52: ...13 Contact Information 49 ...